Suspension Lowering

Lowering your BMW and or any car, should you or shouldn’t you?

Before you  spend your money lowering your vehicle suspension system, you should make sure, the change is compliant with your, country,  province, or state’s, the Motor Vehicle Act.

You should know that: In Ontario any modification in vehicle height of more than 10 cm (lower or higher)  requires the inspection of the vehicle at an approved designated inspection facility to ensure that the modifications meet safety standards.

Modifying your car to a lower stance, will make your vehicle sit closer to the road. It might improve handling, speed and control, but only when done properly. Some car owner  lowering their car for  cosmetic reason.

What ever your reason is to lowering your car, it is fact a lowered car often create rougher ride. However there are car owners that don’t mind because they value aesthetics over the ride.

There  are a lot of different kind of lowering kit are on the market, however any kind of after market suspension lowering kit, and / or suspension system alteration has its own specific effects on a vehicle.

There are pros and cons to lowered suspension systems.

The Pro’s: Lower center of gravity,  to improve the  cornering ability of the vehicle. With a lowered suspension, less air going underneath the vehicle, and this can create a better outcome for wind drag on a car. It’s done on race cars to improve the  cornering ability, to gain speed or keep high speed during cornering..

Lowered suspension also increases camber which will furthermore increase the angle to fight the tire distortion in extreme cornering. It will ultimately cause excessive and extreme tire wear (sometimes less than five thousand kilometers driving).

When the center of gravity is lower, the rollover risk is lower too. The higher the car sits, easier it rolls over.

Take a look at the next photos and you will see, the tires are fairly new, but they have a lot of damage, wear inside and cracks, do to incorrect suspension geometry, and weight delivery.

The con’s: Stiff uncomfortable ride.  Excessive suspension component wear on joints and shafts and unpredictable handling in rough road conditions including bumps and potholes, could cause body damage to suspension mounting points on the chassis. Contact with the ground can cause seriously damaged. The oil pan and exhaust system are particularly vulnerable.

More con’s; The normal ride height is optimized by the suspension engineers to give you proper comfortable ride,  great cornering and optimal tire wear. Furthermore joints and axles are optimized for the original ride height to provide proper suspension travel and suspension and tire wear for the rest of the life of your vehicle.

Shocks and springs are matched to work together regardless of type of the vehicle and for the best ride quality possible considering weight and type of the vehicle.

Low suspensions can get caught up in anti-lock brake apparatus, sway bars, or even with the sidewalls of the tires. An incorrectly set up suspension can actually chew on tires, causing some serious potential risks.

Please keep in mind there is a reaction to every action and suspension geometry is engineered not guessed by the manufacturers by people whom do this for a living with years of experience and knowledge in the field. So when you modify your car beware of the consequences.

Contact us for more details at:  (1) 905.795.0419


Our exclusive, cutting edge, 3D laser alignment diagnostic tool

BMW specialist Mississauga: How to prepare your BMW automobile for winter, at next>>>